Lg Network Attached Storage with built-in Blu-ray Rew Manual de usuario Pagina 145

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 157
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 144
. RAID trouble shooting
1
Error is due to the existing HDD.
a If the RAID configuration is RAID1, choose between each of the following.
Back up the volume data on another storage device. Next, reconfigure
the volume.
Format the newly connected HDD. Data in the volume where the
problem has occurred should be backed up by the administrator.
Separate the HDD in which the error has occurred. Execute RAID1
reconfiguration after exchanging HDD on the LG NAS.
b When RAID configuration is RAID5, the volume state is changed to
‘destroyed’. The data must be backed up and the system must be
reconfigured. Some data may be lost during this process.
When connecting or disconnecting the HDD, strictly adhere to the following
procedure and avoids abnormal system operation or data obstruction.
1.
In the LG NAS, one HDD can be connected or disconnected at a time.
2. 10 seconds will lapse before 2 tones are heard when the LG NAS is connected to
or disconnected from a new hard drive. Next, connect or disconnect the HDD.
Vista de pagina 144
1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 156 157

Comentarios a estos manuales

Sin comentarios