LG LNB5110 Manual de usuario descargar pdf (Pagina 22)

22 Operation and settings

Note:

If you want to deny or to allow a range of IP addresses, enter

the start IP address to “From” and the end IP address to “To”.

You can also add an IP address by entering the same IP

address to “From” and “To”.

3. Click the [Save] button.

4. Repeat the steps 1 to 3 to add additional IP address.

• Remove: Click this button to delete the IP address.

1. Select the alias from the list.

2. Click the [Remove] button. The IP address will be deleted.

IPv6 address

• Add: Click this button to add the IP address.

1. Click the [Add] button.

2. Set the IP address option.

- Alias: Enter the alias.

- IPv6 address: Enter the IP address for IP filtering.

3. Click the [Save] button.

4. Repeat the steps 1 to 3 to add additional IPv6 address.

• Remove: Click this button to delete the IPv6 address.

1. Select the alias from the list.

2. Click the [Remove] button. The IPv6 address will be deleted.

SNMP

The Simple Network Management Protocol (SNMP) is an application

protocol to exchange the management information of network

devices.

SNMP v1/v2c

> Enable SNMP v1/v2c: Selects when SNMP is allowed access

to this device.

> Read Community: Specifies the SNMP management

community in which you want to read this system.

> Write Community: Specifies the SNMP management

community in which you want to write this system.

SNMP v3

> Enable SNMP v3: Selects when SNMP v3 is allowed access to

this device. It supports authentication and encryption.

> SecurityName: Type the security name for the SNMP.

> Password: Type the password for the SNMP.

• Save: Click this button to confirm the settings.

QoS

You can specify network Quality of Service (QoS) settings.

QoS DSCP Configuration

> Video DSCP: Enter the priority of Video for DSCP

(Differentiated Service Code Point) Quality of Service.

> Audio DSCP: Enter the priority of Audio for DSCP Quality of

Service.

> Event DSCP: Enter the priority of Event for DSCP Quality of

Service.

• Save: Click this button to confirm the settings.

802.1x

Specifies whether 802.1x network access is enabled.

802.1x/EAPOL using EAP-TLS

> Enable: Select on to enable the protocol. Current

authorization status of 802.1x port is displayed on buttons

right.

Certificates

> To upload or remove the certificates

1. Click the [Browse] Button.

2. Find and open the certificates file.

- CA Certificate: Upload the accredited certificate included

public key.

- Client Certificate: Upload the accredited certificate

included client authentication key.

- Client private key: Upload the accredited certificate

included client private key.

3. Click the [Upload] button to install certificates.

4. Click the [Remove] button to delete certificates.

Basic Configuration

> EAPOL Version: Select the EAPOL version.

> EAP ID: Enter the ID of the client certificate using up to 16

characters.

> Password: Enter the password of the client private key using

up to 16 characters.

• Save: Click this button to confirm the settings.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 37 38

Comentarios a estos manuales

Sin comentarios

LG LNB5110 Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad LG LNB5110